This week I made one of my favorite projects ever: simple cement succulent pots.
This is one of my favorite projects to date – also the easiest and least expensive: the children’s artwork display located in our Family Command Center – otherwise known as the mud room.
I wanted plenty of space where the children could hang their artwork and good grades with pride, without that messy cluttered look on the fridge. It also needed to be really flat to the wall, since the area I’d designated is in a space the width of a hallway.
Here’s how I did it:
- Buy these eye hook screws and wire at the hardware store for less than $5 total (or spend a few extra bucks and shop Amazon at the links above if you want to save a trip to the store).
- Drill holes into the wall where you want your eye hooks to go. Screw the eye hooks into the wall by hand. Then, wrap your wire around one of the hooks a few times. Stretch it to the other eye hook, pulling and straightening as you go. Wrap it around that eye hook 2-3 times and cut the wire.
- I already had these cute little inexpensive clips on hand, leftover from Eve’s party favors.They work great for holding the various art and school papers the kids bring home.
- Voila! Children’s art center complete in 20 minutes and for less than $5.
As for the rest of our family mud room command center, it’s still a work in progress. I have dreams for this space!
I found that sign at the thrift store. I think it was from a hotel long ago. I just love it!
What do you think of my low-tech art center for the kids?
Make a Statement with Inexpensive Palette Art & Shop Lights
This week we finally finished my vision for lights and feature art above Dub’s bed.
engineering prints = Inexpensive large wall art
Engineer prints are a great way to design a boy bedroom, bringing custom touches through large photo prints on a budget.
I’m very slowly beginning the process of decorating our new home, and focusing on the areas where inspiration strikes me the most. Dub’s room is the one I have the most concrete vision for, and I knew exactly where I wanted to start when I saw this idea for engineer prints for a boy’s room.
I immediately set out taking images of the things most important to Dub. He loved being able to be a part of it in this way. He loves Legos, video games, and the Wilson brand holds special inside meaning for us
I was able to order the engineering prints online by sending the images to the FedEx Kinkos copy store. I ordered 18×24 engineer prints.
We recently made the decision to sell our “starter” home and build a new home that better accommodates our growing family. We bought this home just months before our wedding, had three babies here and many, many precious memories as a family. We’re ready for the next chapter, but this sentimental mom is feeling a bit emotional about it, as well.
The moment we signed the papers to build our new home I was immediately motivated to take on a project I’ve been meaning to for a long time – make a family growth chart that we can take with us – wherever we go. Our former growth chart was done the old fashioned way – with pencil on the wall of our kitchen (that I still can’t bring myself to paint over even since I’ve made this beautiful new chart).
I’d once tried my hand at an embroidered chart that was supposed to be cute and charming, but didn’t end up looking quite as polished as my inspiration. I also found that I was too lazy to embroider once a year. My laziness factor is high.
So I moved on to those cute reclaimed signs I’ve seen all over Pinterest.
I started with a 3/4″x7″x8′ piece of cedar lumber that I purchased at Home Depot for less than $9. First, I enlisted Dub to weather it for me. I gave him chains and a hammer and let him have at it. I stained it with leftover stain that I used on our stairs for our garage makeover.
From there, I had to get measuring – my least favorite part. Our family is really tall, so I cut my board to 6′ tall and painted 1′ white stripes using leftover paint from the garage makeover. These are some terrible progress photos, but you get the idea.
I actually liked the way this looked when I was done, but I went ahead and sanded it to give it a more distressed look.
Then, I used my silhouette to create the measurement marks. I barely use my Silhouette but I used it for this, figuring it would make the measuring much easier for me. I measured it on the computer, cut it out on the Silhouette and then used transfer paper to stick it right on the board without having to re-measure.
I’m super happy with the way that it turned out! I can’t wait to hang this measurement chart in our new home next year. I can see keeping this chart in our home forever, and measuring little grandbabies someday.
Postscript: after completing my chart, I stumbled upon this cute version by Handmade Charlotte
If I had to do it over again, I think her way of painting the numbers would be a lot cheaper and easier. However, I’d still want to make the measurement marks so that I could tell visually exactly how tall the kids are. Everytime they get measured they want to know EXACTLY how many feet, inches and centimeters tall they are. Because that matters to 4 and 6 year olds.
What do you think? Do you have a family growth chart in your home?